ARTICLE

What Fastmarkets 2026 Means for Pulp and Paper Mill Operations

Articles

Published on: November 19, 2026

18 minutes read

Title card reading “What the market said in Chicago, and what it means for mill operations” over a paper machine, from MAJIQ’s Fastmarkets 2026 recap

What Fastmarkets 2026 Means for Pulp and Paper Mill Operations

This year’s Forest Products North America and International Containerboard Conference pointed to a common theme: getting more from the mills we already have.

 

Each November, Fastmarkets brings producers, converters, brand owners and investors together to compare notes on where pulp, paper and packaging markets are heading. Our team spent November 2–4 in Chicago listening to market outlooks, CEO conversations and a brand-owner panel.

The headline was not a single forecast. Speakers kept returning to the same conditions: uncertainty that has become the baseline, capital that costs more than it has in years, and markets rebalancing through closures rather than demand growth. For mills, that combination shifts attention toward the uptime, quality and flexibility of the assets already running.

Below, we summarize the market signals we heard and what we think they mean on the mill floor.

Questions this article answers

 

  • How did pulp, paper and packaging markets perform in 2026, and what comes next?
  • How are higher interest rates and costly capital changing mill investment decisions?
  • Why do reliability, quality and fiber matter more in a tighter market?
  • What do brand owners and consumers now expect from fiber packaging suppliers?
  • How are pulp and paper companies actually using AI?
  • What do these trends mean for pulp and paper industry software decisions?

The 2026 Containerboard, Pulp, and Paper Market at a Glance

 

Across most grades, supply is being rebalanced through closures, conversions and downtime rather than through demand growth. According to Fastmarkets’ market outlooks, the mills that remain are being asked to run harder and adapt faster, while costs absorb much of the benefit from higher prices.

  • Containerboard: US producers have removed about 10% of capacity since 2024. The inventory-adjusted operating rate reached 97% in the second quarter of 2026, then fell below 93% in the third. Prices rose about $170 per ton this year, but cost inflation absorbed more than half of the increase.
  • Recovered paper (OCC): US OCC prices rose 104% from January through October. Mill inventories hit a record low of 4.8 days in May, as virgin capacity closures pushed the recycled share of US containerboard production from 40% to 42%.
  • Boxboard: Global capacity grew 4.9% a year from 2022 to 2025, while production grew 1.2%. In North America, SBS prices rose in July 2026 for the first time in more than four years, and a record SBS–CRB price gap is encouraging buyers to swap grades.
  • Market pulp: China’s integrated pulp capacity has more than tripled in a decade, reducing its reliance on imports. Northern softwood prices are barely covering cash costs, and about 8.7 million tons of new hardwood capacity is planned in Brazil, Indonesia and China.
  • Graphic paper: North American demand is on track to decline only 1–2% in 2026, while imports reached a record 22% of the market. Fastmarkets expects a sharper decline in 2027.

 

 

Containerboard Outlook for 2027-28

 

Containerboard demand has held up better than many assumed. After the Fibre Box Association revised its methodology, Fastmarkets now estimates 2025 box shipments were roughly level with 2019, not nearly 5% below. Even so, growth looks modest: Fastmarkets forecasts a 0.4% decline in 2026 and 0.9% growth in 2027, held back by slower population growth, affordability pressure and GLP-1 effects on food volumes.

On the supply side, announced projects should add about 1 million tons back from the second-quarter low, giving the market room to rebuild inventories. By 2027–28, Fastmarkets suggests the market may need new capacity again. High interest rates, however, have raised the bar for building it.

Uncertainty and Costly Capital Are Reshaping Mill Investment

 

Uncertainty has eased from its late-2025 peak but remains several times higher than in 2024, according to Fastmarkets’ opening keynote. Combined with interest rates that look likely to stay higher for longer, that is making producers more selective about where every capital dollar goes.

The numbers behind that caution are significant. Fastmarkets noted that the US 10-year Treasury yield moved above 5% for the first time since 2007, raising the hurdle for new projects in a capital-intensive industry. If the market does need more supply, Fastmarkets expects it is more likely to come from capital-light projects at existing mills, including conversions, than from greenfield builds.

Producers on stage described the same discipline. Sonoco CEO Howard Coker, this year’s North American CEO of the Year, said major capital decisions are waiting on more stability and predictability. The company’s $40 million Richmond, Virginia, modernization is phased so the mill can keep producing about 120,000 tons a year during construction.

Laurent Sellier, President and CEO of Smurfit Westrock North America, was direct about his priorities: “What matters to me the most today is the unaffordability of capital.” Projects, he said, need to earn a return that holds up against opportunities elsewhere.

Getting More from Existing Mill Assets

 

Mike Grimm, a global manufacturing executive with Phoenix Paper and American Eagle Paper Mills, shared an example of what that discipline can look like in practice. Facing a $2 million turbine rebuild that would keep the mill running but deliver no payback, his team spent three months studying the mill’s actual power requirements. The result was a package boiler project with about a two-year payback, completed for less than half of the original engineering bid by the mill’s own maintenance team.

Grimm also pointed to an opportunity smaller mills can pursue without major capital. When competitors close machines, some products are left without a supplier, and a nimble mill can adapt its equipment to make them.

For mill leaders, the common thread is that the next improvement is more likely to come from existing machines than new ones. Uptime, yield and the ability to make new grades or products on current equipment carry more weight when capital is scarce. Making those decisions well depends on accurate data about how each machine actually performs.

Why Reliability, Quality and Fiber Matter More in a Tighter Market

 

When containerboard runs close to capacity and recovered fiber is scarce, every lost hour and off-grade roll costs more than it did a year ago. Several speakers described a market where the margin for operational error has narrowed.

Fiber is a clear example. Fastmarkets attributed this year’s OCC price rally mainly to supply: snowstorms, record diesel prices and driver shortages cut collection while demand held steady. With inventories averaging 5.5 days through September, mills had little buffer against disruption. Freight added to the pressure, with US diesel prices up 74% since December 2025.

What Mill Leaders Watch First

 

Asked which indicators he checks first, Grimm kept the list short. “In any mill, your asset availability is king,” he said. After that comes yesterday’s sales and product mix, first-pass quality and how much went back to the broke bin.

He also favored real-time, exception-based alerts over waiting for daily reports. Longer-term views, he added, help reveal where performance is slowly drifting in ways a single day’s data won’t show.

Lighter Boxes, Tighter Tolerances

 

Lightweighting adds another layer. Sellier noted that the average US box is 20–25% heavier than its European counterpart, and that US boxes have become roughly 6% lighter over the past five years. He questioned how much of that extra weight is required to protect the product, and how much reflects habit in box design.

In our view, lighter basis weights and a rising share of recycled fiber leave less room for variation in basis weight, moisture and strength. That makes consistent quality data, and the ability to trace a roll back to its production conditions, more valuable. Our article on what pulp and paper MES does covers how exception management, quality tracking and lineage fit into mill operations.

What Brand Owners and Consumers Expect from Fiber Packaging Suppliers

 

Consumers are spreading purchases across club stores, dollar stores and e-commerce, and each channel needs a different package. Brand owners at the conference said they want suppliers who can handle that variety while offering clear costs, reliable supply and dependable quality.

More Pack Formats, Shorter Runs

 

Matthew Seidner of McKinsey described a consumer who now treats volatility as normal and trading down as a habit. Private label continues to gain share, and club, dollar and e-commerce channels are growing faster than traditional retail. Club stores want larger multipacks, dollar stores want smaller value packs, and e-commerce wants right-sized, shipment-ready formats.

For packaging producers, that means more SKUs, shorter runs and more changeovers. “Complexity can eat your margin, or it can be the source of your margin,” Seidner said.

Sustainability rarely decides a purchase on its own, he added, but consumers consistently rank paper among the most sustainable materials. Regulation such as extended producer responsibility (EPR) is likely to move packaging decisions faster than consumer preference.

What the Brand-Owner Panel Asked For

 

The brand-owner panel brought together Alena Russo of Mars, Silvia Ramirez of Boston Scientific and Nik Milosev of Barilla. Their priorities overlapped:

  • Cost transparency: Russo explained that understanding a supplier’s cost drivers helps both sides find savings together, rather than simply squeezing margin.
  • Supply security: Milosev called it his first priority, since nothing else matters without supply.
  • Quality: Panelists agreed a cheaper carton is no saving if it stops a line, damages product or erodes consumer trust.
  • Change management: Ramirez said even a small change in board, ink, glue or production machine can require about nine months of revalidation for a medical device. Boston Scientific asks suppliers for at least six months’ notice.
  • Carbon data: Russo and Ramirez both named carbon footprint, especially Scope 3 emissions, as their leading sustainability measure for paper packaging.

Russo also emphasized right-first-time design. Getting a package right at launch avoids revisiting it two years later for cost takeout.

For mills and converters, these expectations translate into operational requirements. Shorter runs put more pressure on scheduling and trim decisions. Advance change notices, documentation and carbon reporting depend on knowing exactly which materials, specifications and processes went into each order. Supply security also extends to finished goods, including inventory held in third-party warehouses.

How Pulp and Paper Companies Are Using AI

 

Speakers described AI as useful but uneven. The clearest early value they cited was in analyzing production data, capturing operator knowledge and reducing repetitive manual work, with plenty of skepticism about tools priced beyond the value they deliver.

Starting with Production Data

 

Coker said Sonoco’s first AI work began in its mills, pulling PLC data together to improve predictability, and is now moving into supply chain management. He also cautioned against signing up too quickly for inexpensive subscriptions that can end up costing more than the benefit they provide.

Sellier separated what he called “hard AI” from “soft AI.” Hard AI includes increasingly adaptive robotics for box plant roles that are difficult to staff. Soft AI covers the optimization tools already running in Smurfit Westrock’s paper mills and AI-based knowledge tools that help people run operations without relying only on experience passed down over decades.

Capturing Knowledge and Supporting Operators

 

Grimm described how AI helped at Phoenix Paper, where a fully integrated mill had sat cold for 18 months before restart. Training tools and operator guardrails proved effective while crews learned what the controls were telling them. As he put it, AI “can give you night vision when you need it.”

On the research side, Sandor Becz of FM outlined how digital twins support predictive maintenance, early fault detection, operator training and emissions tracking. Each of those applications depends on a governed data platform underneath.

The brand-owner panel offered a buyer’s view. AI is already speeding up RFPs, risk analysis and should-cost models, but panelists stressed that it is only as good as the data it draws from.

That point applies on the mill floor too. AI tools for operators, planners and maintenance teams rely on clean, connected production data and on the know-how of experienced people being captured somewhere it can be used. We explored the knowledge side in more detail in our article on how pulp and paper MES helps preserve mill knowledge.

What These Trends Mean for Pulp and Paper Industry Software

 

Software won’t change the market conditions described in Chicago. Each of them, though, raises the value of accurate, connected production data and of systems that can adapt as mills change what and how they produce. For mills evaluating pulp and paper MES, a few capabilities stand out.

Real-time visibility and exception management. When the market leaves little slack, production teams need to see availability, quality and broke as they happen. Exception-based alerts help teams intervene sooner, before a minor issue turns into lost tons.

Quality, lineage and traceability. Brand owners expect advance notice of changes, documentation and, increasingly, carbon data. Linking each roll, sheet or bale to its production conditions and specifications makes those questions faster to answer.

Planning, scheduling and trim for shorter runs. More SKUs and changeovers mean more decisions per shift. Integrated planning and trim tools help planners respond to changing orders and machine constraints without repeated manual adjustments.

A consistent data foundation. Analytics and AI tools depend on clean, consistent data across production, inventory and shipping. A universal data model gives mills one version of what happened in the mill.

Configuration, not customization. Grade swaps, machine conversions and new products are part of how mills are adapting to this market. A configurable system lets mills adjust workflows without the technical debt that can come with heavy customization. For mills that already run a large ERP, a small-footprint MES such as Ether can add mill-specific capabilities without a full replacement. Our article on the hidden costs of choosing the wrong MES explores the long-term cost side of that decision.

After more than 40 years building software for pulp and paper, MAJIQ sees the same pattern in today’s market: mills that understand exactly how their assets perform are better placed to protect margins when conditions tighten.

Looking Ahead to 2027

 

The outlooks in Chicago differed by grade and region, but they pointed in a similar direction. With uncertainty likely to persist and capital likely to stay expensive, much of the industry’s progress over the next two years may come from the mills already running: how reliably they operate, how consistently they produce to spec and how quickly they adapt to new grades and customer demands.

If you’d like to talk through what these trends mean for your mill, contact a MAJIQ expert. You can also explore more insights on our resources page.

Frequently Asked Questions

 

Why Are So Many Pulp and Paper Mills Closing?

Mills typically close when demand for their grade shifts, costs rise faster than prices and reinvestment can’t earn an adequate return. In 2026, those pressures hit graphic papers, northern softwood pulp and older containerboard capacity. Fastmarkets noted that temporary downtime eventually costs more than closure, and that higher borrowing costs raise the risk for older assets facing unexpected capital needs.

What Is the Containerboard Market Outlook for 2027?

 

Fastmarkets forecasts US box shipments to grow about 0.9% in 2027 after a slight decline in 2026. Roughly 1 million tons of announced capacity should give the market room to rebuild inventories, while fiber and freight costs remain the main pressure on margins. By 2027–28, the market may need new capacity, though high interest rates make it harder to justify.

How Are Paper Mills Using AI Today?

Conference speakers described mills using AI to analyze PLC and process data, run optimization tools, train operators and capture knowledge from experienced staff. Box plants are adding more adaptive robotics for hard-to-staff roles, and digital twins are being applied to predictive maintenance. In each case, results depend on the quality and connectedness of the underlying production data.

Related Articles

How Pulp and Paper Mills Can Better Manage Inventory Across Third-Party Warehouses

ARTICLE

14 October 2026

How Pulp and Paper Manufacturers Can Avoid the Hidden Costs of Choosing the Wrong MES

ARTICLE

10 September 2026

How Pulp and Paper Manufacturers Protect Margins Through Better Trim Decisions

ARTICLE

27 August 2026

What to Expect During a Pulp and Paper MES Implementation

ARTICLE

19 June 2026

The Aging Workforce Is Reshaping Pulp and Paper Mill Operations

ARTICLE

5 June 2026

paper mill workforce knowledge transfer

Is Your Pulp & Paper Business Ready for a Modern MES?

ARTICLE

10 April 2026

Preparing Pulp and Paper Mills for a Changing Workforce

ARTICLE

25 March 2026

How to Choose a Pulp and Paper MES That Grows With Your Mill

ARTICLE

3 March 2026

Looking to streamline your roll, sheet, and bale manufacturing process? We’re here to help!

The MAJIQ Difference

Expertise You Can Trust

Decades of industry expertise.

24/7 Dedicated Support

Always here for you.

Rock Solid Reliability

Stable, proven, and always on.

Future Proof

Proactive updates always.